Best Malco Drills

Drill Clamp for 1ELH1 Shear

Highlighted Features

  • Makes cutting with the TurboShear model TS1 a one-handed
  • Rails of the drill clamp are easily attached to the TS1 TurboShear, and positioned over the body of the
  • Compatible with all current and pre-existing Malco TurboShear drill
  • Made of strong but lightweight
  • Fits most 1200 RPM or larger cordless or A/C
  • Made in the USA

The drill clamp fits most 1200 rpm or larger cordless or a/c drills to make cutting with the turboshear model Ts1 a one-handed operation. Made of strong but lightweight aluminum, the rails of the TSDC drill clamp are easily attached to the Ts1 and positioned and tightened over the body of a drill. The tsce drill clamp and Ts1 turboshear combination can be repositioned upside down as required for e... [Read More]

Features

  • UPC: 686046530550
  • Color: NA
  • Brand: Malco
  • Manufacturer: Malco
  • Information

    • Best Choice - #1 Malco Drills
    • Checked on 14/11/2019
    • Based on 80 Reviews
    • Warranty: Lifetime warranty
    Check Latest Price on Amazon

    Malco TSHD Turboshear Heavy Duty Metal Cutting Attachment Shear

    Highlighted Features

    • Made in the USA
    • Replaceable blades
    • Turns your power drill into a heavy duty power
    • Inserts into the chuck of a 14.4 volt or larger A/C or cordless
    • Capacity to cut 18 gauge galvanized steel and 20-gauge spiral
    • Navigates tight patterns and square
    • Clamping devise is included

    Turboshear metal cutting attachment Shear, heavy duty, suitable for use with: 14.4 V 3/8 in cordless or corded drill, 16 mild/18 GA cutting capacity, steel, galvanized, for ferrous and non-ferrous sheet metal, metal roofing, vinyl, steel mesh, ductwork and furnace jackets.

    Features

  • UPC: 796084322311
  • Brand: Malco
  • Size: 1-(Pack)
  • Manufacturer: Malco
  • Information

    • Best Choice - #2 Malco Drills
    • Checked on 14/11/2019
    • Based on 28 Reviews
    • Warranty: NA
    Check Latest Price on Amazon

    Malco TSMD Double-Cut TurboShear Drill Attachment

    Highlighted Features

    • Remove a narrow spiral scrap from the tool path to produce a clean, straight edge on both sides of the
    • These blades can approach a cut from either end to produce a quality work-piece
    • Blades can also navigate up to 90Degree outside profiles of metal roofing panels, or metal ductwork, and are beefy enough to cut through
    • The long lasting carbon steel blades are also easily replaced on the
    • Made in the USA

    Highlights: make your drill a double-cut metal Shear now you can get double-cut performance in a versatile Malco Turboshear fits the corded or cordless drill You already own a compact telescoping clamp accommodates both length and width of any size motor housing, including smaller impact drivers, to ensure easy one-hand operationoptional Spacers are stored on clamp for large motor housings The cla... [Read More]

    Features

  • UPC: 686046546636
  • Brand: Malco
  • Manufacturer: Malco
  • Information

    • Best Choice - #3 Malco Drills
    • Checked on 14/11/2019
    • Based on 83 Reviews
    • Warranty: Limited Lifetime
    Check Latest Price on Amazon

    Malco TS1 Turbo Shear 20 Gauge Capacity Sheet Metal Cutting Attachment

    Highlighted Features

    • Turns your power drill into a power
    • Inserts into chuck of an A/C or cordless
    • 20 gauge capacity in galvanized
    • Navigates tight patterns and square
    • TSDC Drill Clamp can be purchased
    • Made in the USA

    Features

  • UPC: 686046530208
  • Color: NA
  • Brand: Malco
  • Size: Pack of 1
  • Manufacturer: Malco
  • Information

    • Best Choice - #4 Malco Drills
    • Checked on 14/11/2019
    • Based on 71 Reviews
    • Warranty: 1 Year
    Check Latest Price on Amazon

    Malco TSCM Corrugated Metal Turbo Shear

    Highlighted Features

    • Attaches to a drill or impact driver you already
    • Make fast cross-cuts, lengthwise trim cuts in large or small metal corrugated
    • 360 degree rotating head for optimum tool clearance and material
    • Able to cut curves and straight
    • Made in the USA

    The telescoping drill clamp fits drills and impact drivers large and small-including newer lithium-ion models. The recent redesign allows the tool to rotate 360-degrees and lock into position. The adjustment wrench now stores with the tool, preventing loss. The hex shank drive shaft attaches directly into the chuck of any drill or impact driver. The TSCM makes fast cross-cuts, lengthwise trim cuts... [Read More]

    Features

  • UPC: 686046542317
  • Color: N/A
  • Brand: Malco
  • Size: N/A
  • Manufacturer: Malco
  • Information

    • Best Choice - #5 Malco Drills
    • Checked on 14/11/2019
    • Based on 52 Reviews
    Check Latest Price on Amazon

    Malco TSF2 TurboShear Fiber Cement Backer Board Shear

    Highlighted Features

    • Attaches to a drill or impact driver you already
    • Easily cuts 1/2-inch backer board and 5/16-inch Fiber Cement Siding Plank with minimal
    • 360 degree rotating head for optimum tool clearance and material
    • Able to cut precise arcs, straight lines and fine
    • Made in the USA

    The telescoping drill clamp fits drills and impact drivers large and small-including newer lithium-ion models. The recent redesign allows the tool to rotate 360-degrees and lock into position. The adjustment wrench now stores with the tool, preventing loss. The hex shank drive shaft attaches directly into the chuck of any drill or impact driver. The TSF2 makes cuts in 1/2" (13 mm) backer board and... [Read More]

    Features

  • UPC: 686046530956
  • Color: NA
  • Brand: Malco
  • Size: 1
  • Manufacturer: Malco Products
  • Information

    • Best Choice - #6 Malco Drills
    • Checked on 14/11/2019
    • Based on 77 Reviews
    • Warranty: Limited Lifetime
    Check Latest Price on Amazon

    Malco MSHC 1/4 & 5/16 Reversible Hex Chuck Driver

    Highlighted Features

    • Reversible 1/4" & 5/16" hex
    • Tested one-piece driver
    • Easy-clean magnet
    • Ideal for use with Malco zip-in and bit-tip

    This unique, exclusive, (U.S. Patent pending), double-duty chuck driver ensures that popular 1/4-inch and 5/16-inch magnetic hex drives are always at hands reach. The dual-sided hex socket fits over a 1/4-inch magnet-tipped, ball-detent locking hex shaft and is quickly reversed for changing sizes. Tested torque of the socket and shaft is equal to comparable one-piece single size drivers to ensure ... [Read More]

    Features

  • UPC: 686046549439
  • Color: Original Version
  • Brand: Malco
  • Size: 1-Pack
  • Manufacturer: Malco
  • Information

    • Best Choice - #7 Malco Drills
    • Checked on 14/11/2019
    • Based on 54 Reviews
    Check Latest Price on Amazon

    Malco CBB Replacement Cutter Bits for HC1 or HC2 Model, 6-Pack

    Highlighted Features

    • Longest lasting cutter bit
    • Versatile for a variety of metal
    • Precision-fit sealed bearings
    • Easy-adjusting pivot pin

    Distinctive gold Bits, Bearings and Pivot Pin signify the longest lasting, fastest cutting, easiest adjusting solution for cutting holes in sheet metal. Malco Hole Cutters quickly install into the chuck of any corded or cordless drill as small as 1/4-inch (6.4 mm). Lightweight aluminum frames make these accessories extremely portable for a variety of hole cutting applications in sheet metal includ... [Read More]

    Features

  • UPC: 686046531342
  • Brand: Malco
  • Manufacturer: Malco
  • Information

    • Best Choice - #8 Malco Drills
    • Checked on 14/11/2019
    • Based on 64 Reviews
    Check Latest Price on Amazon

    1/4 & 5/16 x 2" Dual-Sided Hex Chuck Driver (Five Pack) MSHC

    Highlighted Features

    • Reversible 1/4 In. & 5/16 In. hex
    • Tested one-piece driver
    • Easy-clean magnet
    • Ideal for use with Malco zip-in and bit-tip

    This unique, exclusive, double-duty chuck driver ensures that popular 1/4-inch and 5/16-inch magnetic hex drives are always at hands reach. The dual-sided hex socket fits over a 1/4-inch magnet-tipped, ball-detent locking hex shaft and is quickly reversed for changing sizes. Tested torque of the socket and shaft is equal to comparable one-piece single size drivers to ensure optimum screw performan... [Read More]

    Features

  • UPC: 799196520125
  • Brand: Malco
  • Manufacturer: MALCO
  • Information

    • Best Choice - #9 Malco Drills
    • Checked on 14/11/2019
    • Based on 52 Reviews
    Check Latest Price on Amazon

    New Extra Long Length 1/4 & 5/16 x 6" Reversible Dual-Sided Hex Chuck Driver - MSHXLC

    Highlighted Features

    • Same Great Malco Bit , New
    • Overall Length : 6"
    • Reversible 1/4 inch and 5/16 inch hex
    • Strong Magnet
    • Magnet can be cleaned with
    • Sold Each

    Brand:Malco C-RHEX This Double-Duty chuck driver with "Easy Clean Magnet," ensures that 1/4 in. & 5/16 in. hex drivers are always a flip away. With single piece strength and an indestructible magnet, it's the Perfect System when paired with Legendary Malco Zip-in and Bit-Tip screws

    Features

  • UPC: 700761112942
  • Brand: Unknown
  • Manufacturer: Malco Products Inc
  • Information

    • Best Choice - #10 Malco Drills
    • Checked on 14/11/2019
    • Based on 79 Reviews
    Check Latest Price on Amazon

    Malco Sheet Metal Double Ender Drill Bits - 12 Pack - 1/8in.

    Malco Sheet Metal Double Ender Drill Bits - 12 Pack -

    Features

    .MBSTable td { border: 1px solid black; display: table-cell; padding: 0px 5px;}.MBSTable th {background-color: #104e8B; color: #FFF; font-weight: bold; font-size: 14px; text-align:center; padding: 12px 12px; border: 1px solid black;} Catalog # Description Decimal Equiv. Length (in.) Length of Twist Pkg.

    Check Latest Price on Wallmart

    Malco MSHML14 Extra Long Magnetic Hex Driver

    Malco MSHML14 Extra Long Magnetic Hex Driver

    Features

    • Model: MSHML14
    • Color: White

    Hex Opening: 1/4"

    Check Latest Price on Wallmart

    Malco Drills Video

    The Malco TSMD TurboShear Double-Cut Metal Shear Drill Attachment

    Leave a Reply